Part 9200-000-A

Description

The MaxPulse landing light controller is a solid state, compact and lightweight lighting controller. It features dual channels and provides Wig Wag and multiple rate control for any combination of LED, incandescent, and HID landing lights. The MaxPulse has an eight position function mode switch. This MaxPulse landing light control unit has spade terminals and a 10A max current rating. Features MaxPulse Landing Light Controller with spade or ring terminals Greatly increases the visibility of the aircraft in both daylight and nighttime operations which improves the safety of the flight Compact, lightweight, powerful, solid state reliability to give that Wig-Wag effect No outboard heat sinks or rheostats Works with all major brands of lights Gives the operator complete control over his landing light and/or taxi light Many settings to choose from X – both circuits are off S – Starboard/Right on only P – Port/Left on only S+P – Both circuits on A44 – Alternate at 44 PPM (STD) B44 – Both flash at 44 PPM A88 – Alternate at 88 PPM A120 – Alternate at 120 PPM FAA STC/PMA approved, with extensive AML RTCA/DO-160E Qualified Comes with MaxPulse unit, installation instructions, spade or ring terminals, placard, drill guide, and knob Specifications Weight: 1 oz Dimensions: Panel label: 1.6 x 1.6 in Control unit: 1.27 in, diameter Voltage range: 12 VDC to 28 VDC Max current: 10 A Operating temperature: -30°C to 85°C Internal Temperature Protection: 85°C S