Part MIL-LDCBS1X2-TNC Avionics

Description

The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards. This mil-spec GPS splitter   features one input & two outputs, and has TNC-type connectors. Features Precise amplitude balance: < 1 dB variation between ports Flat group delay: < 1 ns  between L1 & L2 bands Low insertion loss: -4.0 dB loss across operating frequencies Wide accepted frequency range: covering entire L-band & major GNSS constellations Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults Matched phase balance: < 2° variation between ports Qualification and test reports available Specifications Weight: 10.2 lb, max. Dimensions: 1.3 x 3.25 x 2.5 in (without connectors) Operating Temperature: -57°C to 87°C Housing base plate Finish: Electroless nickel-plated (MIL-C-26074C, class 1) Frequency Range: 1.1 GHz — 1.7 GHz Characteristic Impedance: 50Ω Input SWR: 2.0:1,