2016 CUBCRAFTERS XCUB
Starts from the median asking price of 9 comparable CubCrafters XCUB listings ($398,000), then adjusts for:
- Year -5 vs comparable listings -7.5%
- Airframe time +50 hr vs comps -0.1%
- Engine time +56 hr vs comps -0.4%
- No Autopilot (78% of comps have one) -1.4%
- Market supply: 3 for sale of 15 FAA-registered -5.0%
Shown as a range. An estimate from asking-price comparables and FAA supply data — not an appraisal.
Overview
| Make / Model | CubCrafters XCUB |
|---|---|
| Type | Single-Engine Piston |
| Airframe time | 245 hrs |
| Engine time | 245 SNEW |
| Prop blades | 2 |
| Avionics / flight deck | GARMIN |
| Avionics / Audio panel | PS PM3000 |
| Avionics / Nav / com radio | TRIG TY91 |
| Avionics / GPS / datalink | GARMIN Aera 796, GARMIN GDL 39 |
| ADS-B | Yes |
| Annual | June 2026 |
| Inspection | Annual |
Description
Experience the ultimate adventure machine with this CubCrafters XCub — the perfect balance of power, performance, and precision craftsmanship. N555ZM has exceptional STOL capabilities, this aircraft takes you places few others can, from backcountry strips to remote lakesides. If you’re looking for unmatched versatility and pure flying freedom, this XCub delivers it all. Call Clay at Aerista to learn about this incredible machine.
Modifications
Steel Spring Landing Gear 26" Alaska Bushwheel Tundra Tires, with Additional Pair Earth X Battery Direct Push-Rod Aileron Controls Vortex Generators Side-access Baggage Door Rear step to enter Copilot Seat Rosen Sun Visor
Avionics
Garmin Aera 796 GPS Electronics Int’l CGR-30P Engine Monitor Trig TY91 Comm Radio PS-Engineering PM3000R Stereo Intercom Trig TT22 Transponder Garmin GDL 84 (ADS-B package, in/out compliant) Garmin GDL 39 3D (backup attitude gyro, ADHRS, ADS-B weather and traffic, bluetooth) Kannad 406AF Integra
Recommended avionics upgrades
No autopilot is listed — a GFC 500 (or S-TEC 3100 / Trio Pro Pilot where the GFC isn't STC'd) adds a modern digital autopilot with envelope protection, subject to model approval.
See prices & suppliers ›Suggestions are based on the panel described in this listing; verify STC approval for this make/model before any installation.
Service Difficulty Reports (SDRs)
Checking FAA service difficulty reports…
Airworthiness Directives (ADs)
Checking airworthiness directives…
How this aircraft compares
Where this CubCrafters XCUB lands versus other CubCrafters XCUB listings on fyiAero.
Price
22nd pct$300k · 22nd percentile of 9 listings
Airframe time
80th pct245 hours total (TTAF) · 80th percentile of 5 listings
Engine time
83rd pct245 hours since new · 83rd percentile of 6 listings
Percentile = share of comparable listings at or below this value. Lower airframe/engine hours are generally fresher; price reflects the asking price only.
General
| Year | 2016 |
|---|---|
| Manufacturer | CUBCRAFTERS |
| Model | XCUB |
| Serial Number | CC19-0011 |
| Registration # | N555ZM |
| Condition | Used |
| FlightRules | VFR |
| Based at | BKD |
Airframe
| Total Time | 245 |
|---|---|
| Complete Logs | Yes |
Engine
| Engine 1 Make/Model | LYCOMING |
|---|---|
| Engine 1 Time | 245 SNEW |
| Engine TBO | 2000 |
Props
| Prop Manufacturer | HARTZELL |
|---|---|
| Number of Blades | 2 |
| Blade Composition | Composite |
Avionics
| Flight Deck Manufacturer/Model | GARMIN |
|---|---|
| ADS-B Equipped | Yes |
| WAAS | Yes |
| Active Traffic | Yes |
| Engine Monitor | Yes |
| Avionics/Radios | Garmin Aera 796 GPS Electronics Int’l CGR-30P Engine Monitor Trig TY91 Comm Radio PS-Engineering PM3000R Stereo Intercom Trig TT22 Transponder Garmin GDL 84 (ADS-B package, in/out compliant) Garmin GDL 39 3D (backup attitude gyro, ADHRS, ADS-B weather and traffic, bluetooth) Kannad 406AF Integra |
Additional Equipment
| Additional Equipment | Steel Spring Landing Gear 26" Alaska Bushwheel Tundra Tires, with Additional Pair Earth X Battery Direct Push-Rod Aileron Controls Vortex Generators Side-access Baggage Door Rear step to enter Copilot Seat Rosen Sun Visor |
|---|
Interior
| Year Interior | 2016 |
|---|---|
| Number of Seats | 2 |
| Configuration | Passenger |
Exterior
| Year Painted | 2016 |
|---|
Inspection Status
| Inspection Status | Annual Inspection Completed June 2026 **All specifications subject to verification by purchaser |
|---|
Operating costs & specifications — Cubcrafters CC19 180 Xcub
Typical model-level figures for the Cubcrafters CC19 180 Xcub (not this specific airframe).
Performance & dimensions
| Range | 695 nm |
|---|---|
| Cruise speed | 126 kts · 145 mph |
| Takeoff / landing | 170.0 / 170.0 |
About this plane
Single engine piston aircraft with fixed landing gear. The CC19-180 Xcub seats up to 1 passengers plus 1 pilot.
Range from base
Still-air range ring — type an aircraft to change it. Compare aircraft on the Range tool ›
Last flight
Actual flight path from FlightAware for N555ZM. More flight tracking ›
